Jacuzzi tub drain repair // Jakuzzi - whirlpool bathtubs and hot tub spas

Shower Pan and Cement Board

Jacuzzi tub drain repair

The mechanism that opens and closes our tub drain is no longer connected to the lever. Is there a way to repair this without replacing the tub? Fortunately, I can get to the drain through an access door in the wall.

—Larry Casarow, Van Nuys, Calif.

A: Richard Trethewey replies: What you are describing is called a trip-lever tub drain, which allows you to open and close the drain with a lever. Moving the lever raises and lowers a stopper, which opens or blocks the drain passage.

It's definitely possible to get it working again, and that access door may come in handy. First, put a towel over the tub drain to capture any small parts you might drop, then remove the screws holding the overflow cover to the tub. Then see if you can pull the rod and stopper out through the overflow drain opening. If the two rods have come unhooked, you may have luck reaching in with a flexible pick-up tool and snagging the stopper with its spring-loaded claws.

If you can't retrieve the stopper through the overflow, open the access door and disconnect the drain tube by unscrewing the coupling nut and then carefully unscrewing the overflow tube from the overflow fitting. Clean any parts you can reuse and replace the rest with new parts. Put back the tube, slip the assembly back through the opening, making sure the rods aren't tangled, and reconnect the trip lever and cover to the tub wall.

To see if the stopper works, raise the lever and put some water in the tub. If the water drains out, pull out the linkage that connects the lever with the threaded rod and give the rod a few counterclockwise turns so the stopper will go deeper and fit snugly against its seat. When the stopper is adjusted properly-this may take a few tries-tighten the rod's locking nut and put everything back in place.

Need for money? Cash Loans no Credit Check!


You might also like
Repairing a Big Crack on the Side of a Jetted Tub
Repairing a Big Crack on the Side of a Jetted Tub
Bathtub Chip Repair
Bathtub Chip Repair
Keeney Manufacturing Keeney K831-3 3-Inch Replacement Silicone Flapper Seal, Clear
Home Improvement (Keeney Manufacturing)
  • Replacement seal
  • Silicone
  • Fits K833-1, FlushAll(K835-9), K835-10 and K835-12 flapper.
  • Chemical resistant
  • Easy install
Fluidmaster Fluidmaster 540AKRP5 3-Inch Complete Flush Valve and Flapper Repair Kit
Home Improvement (Fluidmaster)
  • Easy adjustable overflow tube eliminates the need for cutting and can be set to meet OEM specifications
  • Installs Easily
  • 5 Year Warranty
Korky Korky 3040BP Red Cadet Toilet Flapper, 3-Inch
Home Improvement (Korky)
  • Fits American Standard toilet models: 2403, 4007, 4019, 4021 and 4027
  • Engineered materials resist chlorine
  • 5 year warranty
NuFlush Fits Toto, Gerber, Mansfield, Crane, Jacuzzi, American Standard and Kohler.
Home Improvement (NuFlush)
  • Best toilet fill valve on the market.
  • Soft Rubber flapper Valve for the best seal.
  • Overflow extension tube to put more water power in your toilets flush.
  • Change your toilet into a power flusher.
  • Change how your toilet flushes. with the best toilet parts money can buy.
Keeney Keeney Flush Valve (K835-12)
Home Improvement (Keeney)
  • Fits Toto, Gerber, Mansfield, Crane, Jacuzzi and any flush valve with similar outlet size
  • For 3 toilet repair
  • Includes adjustable water saving flapper with timing cone No cut overflow tube adjusts from 8 to 12.5
Related Posts