Hot tub cover size
If you are shopping online for a new hot tub cover one of the most important things you will need to know is how to correctly measure your hot tub in order to have the custom built hot tub cover fit properly.
The following 4 tips on how to correctly measure your hot tub will ensure that you receive a hot tub cover that fits:
Continue reading for instructions on how to correctly measure for your new hot tub cover.
If you would prefer to have the hot tub cover skirt sit on top of the wooden cabinet ledge rim then you need to measure the acrylic shell dimension and the skirt length as shown in the dimensions for (X) on figure (B) from above.
In order for the hot tub cover to sit properly you will want to make the length of the skirt about a half inch shorter than distance from the top of acrylic shell to top of wooden ledge rim.
If you prefer to have the hot tub cover skirt overhang the wooden ledge rim then you need to measure the overall cabinet dimensions for (Y) on the figure (B) from above.
In order for the hot tub cover skirt to cover the wooden ledge rim measure from the top of the acrylic shell to bottom of wooden edge rim, as shown in figure (B) from above and the diagram (Y) on the right.
The standard hot tub cover skirt length is 4 inches, however Hot Tub Covers Canada can custom make your hot tub cover with no skirt, or with a skirt up to any length starting from 1.5 inches and up.If your hot tub has rounded corners then Hot Tub Covers Canada will need to know the radius of the corner.
The easiest way to figure this out is by using a carpenter’s square as picture in the diagram on the left.
The distance between the inside corner of the carpenter’s square (A) to the point where it first touches the hot tub (B) equals the radius of the hot tub’s rounded corner, as represented by blue shading.